DJI Matrice 400

Engineered for Excellence, Designed for Versatility
DJI Matrice 400 available in Western Canada through SkyAG Solutions | Drones for Enterprise, Agriculture, and Farming

DJI M400: Long-Endurance Drone Platform With Power-Line-Level Obstacle Sensing

DJI Matrice 400, the enterprise flagship drone platform, boasts an impressive 59-minute flight time, a payload capacity of up to 6 kg, and integrated rotating LiDAR and mmWave radar for power-line-level obstacle sensing. It also supports the O4 Enterprise Enhanced Video Transmission and Airborne Relay Video Transmission, ensuring safer handling and easier operations. Combining Smart Detection with visible and thermal imaging, AR projection, ship-based takeoff/landing, and advanced automation, Matrice 400 excels in emergency response, power inspections, mapping, and AEC.

Matrice 400 Key Features

Let’s Answer Your Questions

It is IP55 rated. Do not fly in rain heavier than 100 mm/24 hr.

The IP rating is not permanently effective and may decrease due to product wear and tear.

Gimbal Cameras: Zenmuse H30, Zenmuse H30T, Zenmuse L2 and Zenmuse P1

Functional Accessories: Zenmuse S1 Spotlight, Zenmuse V1 Speaker, Manifold 3, DJI RC Plus 2 sub2G SDR Module, DJI Cellular Dongle 2

RTK Station: D-RTK 3 Multifunctional Station, D-RTK 2 Mobile Station

Ecosystem Accessories: DJI X-Port

DJI E-Port V2 Development Kit

DJI E-Port V2 Coaxial Cable Kit

DJI SKYPORT V3 Adapter Set

DJI SKYPORT V3 Coaxial Cable Kit

 Accessories for DJI Matrice 400 and Matrice 350 are not compatible with each other.

With a 220 V power supply: In fast charging mode, it takes approximately 45 minutes to fully recharge one DJI Matrice 400 battery. In silent mode, it takes approximately 110 minutes to fully recharge one DJI Matrice 400 battery.

With a 110 V power supply: In fast charging mode, it takes approximately 70 minutes to fully recharge one DJI Matrice 400 battery. In silent mode, it takes approximately 110 minutes to fully recharge one DJI Matrice 400 battery.

Charging time is measured in a test environment with a temperature of 25° C.

The following methods can be used to upgrade the firmware:

  1. Connect the aircraft to the computer to upgrade the firmware of the aircraft and remote controller through DJI Assistant 2 (Enterprise Series).
  2. Use DJI Pilot 2 to update the firmware of the aircraft, remote controller.
  3. Visit the official DJI website to download the offline firmware update package for the aircraft and remote controller. Then, insert the SD card storing the firmware package into the remote controller for offline update.
Contact SkyAG today to order the DJI Matrice 400